You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
nvim_config/init.lua

831 lines
27 KiB

-- Specify the leader
-- NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
vim.g.mapleader = ";"
vim.g.maplocalleader = ";"
-- [[ Setting options ]]
-- Make line numbers default
vim.opt.number = true
vim.opt.relativenumber = true
-- Disable mouse mode
vim.opt.mouse = ""
-- Don't show the mode, since it's already in status line
vim.opt.showmode = false
-- Case-insensitive searching UNLESS \C or capital in search
vim.opt.ignorecase = true
vim.opt.smartcase = true
-- Keep signcolumn on by default
vim.opt.signcolumn = "yes"
-- Configure how new splits should be opened
vim.opt.splitright = true
vim.opt.splitbelow = true
-- Sets how neovim will display certain whitespace in the editor.
-- See :help 'list'
-- and :help 'listchars'
vim.opt.list = true
vim.opt.listchars = { tab = "» ", trail = "·", nbsp = "" }
-- Preview substitutions live, as you type!
vim.opt.inccommand = "split"
-- Show which line your cursor is on
vim.opt.cursorline = true
-- Minimal number of screen lines to keep above and below the cursor.
-- vim.opt.scrolloff = 10
-- General universal settings
vim.opt.sw = 4
vim.opt.ts = 4
vim.opt.expandtab = true
vim.opt.tw = 100
vim.opt.colorcolumn = "+1"
vim.opt.termguicolors = true
vim.opt.pumheight = 5
-- Disable semantic tokens
vim.api.nvim_create_autocmd("LspAttach", {
callback = function(args)
local client = vim.lsp.get_client_by_id(args.data.client_id)
client.server_capabilities.semanticTokensProvider = nil
end,
})
-- Function to get work count in status line
local function getWords()
-- the third string here is the string for visual-block mode (^V)
if vim.fn.mode() == "v" or vim.fn.mode() == "V" or vim.fn.mode() == "" then
return vim.fn.wordcount().visual_words .. ""
else
return vim.fn.wordcount().words .. ""
end
end
-- [[ Basic Keymaps ]]
-- See `:help vim.keymap.set()`
-- Set highlight on search, but clear on pressing <Esc> in normal mode
vim.opt.hlsearch = true
vim.keymap.set("n", "<Esc>", "<cmd>nohlsearch<CR>")
-- Diagnostic keymaps
vim.keymap.set("n", "[d", vim.diagnostic.goto_prev, { desc = "Go to previous [D]iagnostic message" })
vim.keymap.set("n", "]d", vim.diagnostic.goto_next, { desc = "Go to next [D]iagnostic message" })
vim.keymap.set("n", "<leader>e", vim.diagnostic.open_float, { desc = "Show diagnostic [E]rror messages" })
vim.keymap.set("n", "<leader>q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" })
-- Keybinds to make split navigation easier.
-- Use CTRL+<hjkl> to switch between windows
--
-- See `:help wincmd` for a list of all window commands
vim.keymap.set("n", "<C-h>", "<C-w><C-h>", { desc = "Move focus to the left window" })
vim.keymap.set("n", "<C-l>", "<C-w><C-l>", { desc = "Move focus to the right window" })
vim.keymap.set("n", "<C-j>", "<C-w><C-j>", { desc = "Move focus to the lower window" })
vim.keymap.set("n", "<C-k>", "<C-w><C-k>", { desc = "Move focus to the upper window" })
-- [[ Basic Autocommands ]]
-- Go back to last edited line when reopening file
vim.api.nvim_create_autocmd("BufRead", {
callback = function(opts)
vim.api.nvim_create_autocmd("BufWinEnter", {
once = true,
buffer = opts.buf,
callback = function()
local ft = vim.bo[opts.buf].filetype
local last_known_line = vim.api.nvim_buf_get_mark(opts.buf, '"')[1]
if
not (ft:match("gitcommit") and ft:match("gitrebase"))
and last_known_line > 1
and last_known_line <= vim.api.nvim_buf_line_count(opts.buf)
then
vim.api.nvim_feedkeys([[g`"]], "nx", false)
end
end,
})
end,
})
-- [[ Install `lazy.nvim` plugin manager ]]
-- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
if not vim.loop.fs_stat(lazypath) then
local lazyrepo = "https://github.com/folke/lazy.nvim.git"
vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)
-- Get user dictionary
local path = vim.fn.stdpath("config") .. "/spell/en.utf-8.add"
local words = {}
for word in io.open(path, "r"):lines() do
table.insert(words, word)
end
-- [[ Configure and install plugins ]]
--
-- To check the current status of your plugins, run
-- :Lazy
--
-- You can press `?` in this menu for help. Use `:q` to close the window
--
-- To update plugins, you can run
-- :Lazy update
--
--
-- NOTE: Here is where you install your plugins.
require("lazy").setup({
-- [[ Plugin Specs list ]]
-- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
{
"windwp/nvim-autopairs",
config = function()
local remap = vim.api.nvim_set_keymap
local npairs = require("nvim-autopairs")
npairs.setup({ map_bs = false, map_cr = false })
_G.MUtils = {}
MUtils.CR = function()
if vim.fn.pumvisible() ~= 0 then
if vim.fn.complete_info({ "selected" }).selected ~= -1 then
return npairs.esc("<c-y>")
else
return npairs.esc("<c-e>") .. npairs.autopairs_cr()
end
else
return npairs.autopairs_cr()
end
end
remap("i", "<cr>", "v:lua.MUtils.CR()", { expr = true, noremap = true })
MUtils.BS = function()
if vim.fn.pumvisible() ~= 0 and vim.fn.complete_info({ "mode" }).mode == "eval" then
return npairs.esc("<c-e>") .. npairs.autopairs_bs()
else
return npairs.autopairs_bs()
end
end
remap("i", "<bs>", "v:lua.MUtils.BS()", { expr = true, noremap = true })
-- put this to setup function and press <a-e> to use fast_wrap
npairs.setup({
fast_wrap = {},
})
-- change default fast_wrap
npairs.setup({
fast_wrap = {
map = "<M-e>",
chars = { "{", "[", "(", '"', "'" },
pattern = [=[[%'%"%>%]%)%}%,]]=],
end_key = "$",
before_key = "h",
after_key = "l",
cursor_pos_before = true,
keys = "qwertyuiopzxcvbnmasdfghjkl",
manual_position = true,
highlight = "Search",
highlight_grey = "Comment",
},
})
npairs.remove_rule("`")
end,
},
"christoomey/vim-tmux-navigator",
"kana/vim-textobj-user",
{
"GCBallesteros/vim-textobj-hydrogen",
dependencies = {
"kana/vim-textobj-user",
},
},
"godlygeek/tabular",
"tpope/vim-sleuth",
{
"Vigemus/iron.nvim",
ft = { "python" },
config = function()
local iron = require("iron.core")
local view = require("iron.view")
iron.setup({
config = {
-- Whether a repl should be discarded or not
scratch_repl = true,
-- Your repl definitions come here
repl_definition = {
python = {
-- Can be a table or a function that
-- returns a table (see below)
command = "ipython --no-autoindent",
},
},
-- How the repl window will be displayed
-- See below for more information
repl_open_cmd = require("iron.view").bottom(20),
},
-- Iron doesn't set keymaps by default anymore.
-- You can set them here or manually add keymaps to the functions in iron.core
keymaps = {
visual_send = "<leader>sc",
send_file = "<leader>sf",
send_line = "<leader>sl",
cr = "<leader>s<cr>",
interrupt = "<leader>s<space>",
exit = "<leader>sq",
clear = "<leader>cl",
},
-- If the highlight is on, you can change how it looks
-- For the available options, check nvim_set_hl
highlight = {
italic = true,
},
ignore_blank_lines = true, -- ignore blank lines when sending visual select lines
})
vim.keymap.set("n", ";rs", "<cmd>IronRepl<cr>")
vim.keymap.set("n", ";rr", "<cmd>IronRestart<cr>")
vim.keymap.set("n", ";rf", "<cmd>IronFocus<cr>")
vim.keymap.set("n", ";rh", "<cmd>IronHide<cr>")
repl_open_cmd = "horizontal bot 20 split"
end,
},
"vigoux/ltex-ls.nvim",
"tpope/vim-markdown",
"christoomey/vim-tmux-navigator",
-- NOTE: Plugins can specify dependencies.
--
-- The dependencies are proper plugin specifications as well - anything
-- you do for a plugin at the top level, you can do for a dependency.
--
-- Use the `dependencies` key to specify the dependencies of a particular plugin
{ -- Fuzzy Finder (files, lsp, etc)
"nvim-telescope/telescope.nvim",
event = "VeryLazy",
branch = "0.1.x",
dependencies = {
"nvim-lua/plenary.nvim",
-- Useful for getting pretty icons, but requires special font.
-- If you already have a Nerd Font, or terminal set up with fallback fonts
-- you can enable this
{ "nvim-tree/nvim-web-devicons" },
{ "nvim-telescope/telescope-live-grep-args.nvim" },
},
config = function()
-- Telescope is a fuzzy finder that comes with a lot of different things that
-- it can fuzzy find! It's more than just a "file finder", it can search
-- many different aspects of Neovim, your workspace, LSP, and more!
--
-- The easiest way to use telescope, is to start by doing something like:
-- :Telescope help_tags
--
-- After running this command, a window will open up and you're able to
-- type in the prompt window. You'll see a list of help_tags options and
-- a corresponding preview of the help.
--
-- Two important keymaps to use while in telescope are:
-- - Insert mode: <c-/>
-- - Normal mode: ?
--
-- This opens a window that shows you all of the keymaps for the current
-- telescope picker. This is really useful to discover what Telescope can
-- do as well as how to actually do it!
-- [[ Configure Telescope ]]
-- See `:help telescope` and `:help telescope.setup()`
require("telescope").setup({
-- You can put your default mappings / updates / etc. in here
-- All the info you're looking for is in `:help telescope.setup()`
--
defaults = vim.tbl_extend("force", require("telescope.themes").get_ivy(), {
path_display = { "smart" },
}),
})
pcall(require("telescope").load_extension("live_grep_args"))
local builtin = require("telescope.builtin")
vim.keymap.set("n", "<C-g>", require("telescope").extensions.live_grep_args.live_grep_args)
vim.keymap.set(
"x",
"<C-g>",
"\"zy:lua require('telescope').extensions.live_grep_args.live_grep_args(require('telescope.themes').get_ivy({}))<cr><c-r>z"
)
vim.keymap.set("n", "<C-f>", builtin.find_files)
end,
},
{ -- LSP Configuration & Plugins
"neovim/nvim-lspconfig",
dependencies = {
-- Automatically install LSPs and related tools to stdpath for neovim
"williamboman/mason.nvim",
"williamboman/mason-lspconfig.nvim",
"WhoIsSethDaniel/mason-tool-installer.nvim",
-- Useful status updates for LSP.
-- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
{ "j-hui/fidget.nvim", opts = {} },
},
config = function()
vim.api.nvim_create_autocmd("LspAttach", {
group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }),
callback = function(event)
-- NOTE: Remember that lua is a real programming language, and as such it is possible
-- to define small helper and utility functions so you don't have to repeat yourself
-- many times.
--
-- In this case, we create a function that lets us more easily define mappings specific
-- for LSP related items. It sets the mode, buffer and description for us each time.
local map = function(keys, func, desc)
vim.keymap.set("n", keys, func, { buffer = event.buf, desc = "LSP: " .. desc })
end
-- Jump to the definition of the word under your cursor.
-- This is where a variable was first declared, or where a function is defined, etc.
-- To jump back, press <C-T>.
map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition")
-- Find references for the word under your cursor.
map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences")
-- Jump to the implementation of the word under your cursor.
-- Useful when your language has ways of declaring types without an actual implementation.
map("<leader>I", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation")
-- Jump to the type of the word under your cursor.
-- Useful when you're not sure what type a variable is and you want to see
-- the definition of its *type*, not where it was *defined*.
map("<leader>D", require("telescope.builtin").lsp_type_definitions, "Type [D]efinition")
-- Fuzzy find all the symbols in your current document.
-- Symbols are things like variables, functions, types, etc.
map("<leader>ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols")
-- Fuzzy find all the symbols in your current workspace
-- Similar to document symbols, except searches over your whole project.
map(
"<leader>ws",
require("telescope.builtin").lsp_dynamic_workspace_symbols,
"[W]orkspace [S]ymbols"
)
-- Rename the variable under your cursor
-- Most Language Servers support renaming across files, etc.
map("<leader>rn", vim.lsp.buf.rename, "[R]e[n]ame")
-- Execute a code action, usually your cursor needs to be on top of an error
-- or a suggestion from your LSP for this to activate.
map("<leader>ca", vim.lsp.buf.code_action, "[C]ode [A]ction")
-- Opens a popup that displays documentation about the word under your cursor
-- See `:help K` for why this keymap
map("K", vim.lsp.buf.hover, "Hover Documentation")
-- WARN: This is not Goto Definition, this is Goto Declaration.
-- For example, in C this would take you to the header
map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration")
-- The following two autocommands are used to highlight references of the
-- word under your cursor when your cursor rests there for a little while.
-- See `:help CursorHold` for information about when this is executed
--
-- When you move your cursor, the highlights will be cleared (the second autocommand).
local client = vim.lsp.get_client_by_id(event.data.client_id)
if client and client.server_capabilities.documentHighlightProvider then
vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, {
buffer = event.buf,
callback = vim.lsp.buf.document_highlight,
})
vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, {
buffer = event.buf,
callback = vim.lsp.buf.clear_references,
})
end
end,
})
-- LSP servers and clients are able to communicate to each other what features they support.
-- By default, Neovim doesn't support everything that is in the LSP Specification.
-- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
-- So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
local capabilities = vim.lsp.protocol.make_client_capabilities()
capabilities = vim.tbl_deep_extend("force", capabilities, require("cmp_nvim_lsp").default_capabilities())
-- Enable the following language servers
-- Feel free to add/remove any LSPs that you want here. They will automatically be installed.
--
-- Add any additional override configuration in the following tables. Available keys are:
-- - cmd (table): Override the default command used to start the server
-- - filetypes (table): Override the default list of associated filetypes for the server
-- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
-- - settings (table): Override the default settings passed when initializing the server.
-- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
local servers = {
clangd = {
filetypes = {
"c",
"cpp",
},
},
-- gopls = {},
jdtls = {
filetypes = { "java" },
settings = {
java = {
format = {
settings = {
url = "~/RedTop.xml",
},
},
},
},
},
pyright = {},
bashls = { dependencies = "shellcheck" },
rust_analyzer = {
settings = {
files = {
excludeDirs = { "$HOME", "$HOME/.cargo/**", "$HOME/.rustup/**" },
},
},
},
ltex = {
settings = {
ltex = {
enabled = { "latex", "tex", "bib", "markdown" },
language = "auto",
diagnosticSeverity = "information",
sentenceCacheSize = 2000,
latex = {
commands = {
["\\hypertarget"] = "dummy",
},
},
dictionary = (function()
-- For dictionary, search for files in the runtime to have
-- and include them as externals the format for them is
-- dict/{LANG}.txt
--
-- Also add dict/default.txt to all of them
local files = {}
for _, file in ipairs(vim.api.nvim_get_runtime_file("dict/*", true)) do
local lang = vim.fn.fnamemodify(file, ":t:r")
local fullpath = vim.fs.normalize(file, ":p")
files[lang] = { ":" .. fullpath }
end
if files.default then
for lang, _ in pairs(files) do
if lang ~= "default" then
vim.list_extend(files[lang], files.default)
end
end
files.default = nil
end
return files
end)(),
},
},
},
lua_ls = {
-- cmd = {...},
-- filetypes { ...},
-- capabilities = {},
settings = {
Lua = {
runtime = { version = "LuaJIT" },
workspace = {
checkThirdParty = false,
-- Tells lua_ls where to find all the Lua files that you have loaded
-- for your neovim configuration.
library = {
"${3rd}/luv/library",
unpack(vim.api.nvim_get_runtime_file("", true)),
},
-- If lua_ls is really slow on your computer, you can try this instead:
-- library = { vim.env.VIMRUNTIME },
},
-- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
-- diagnostics = { disable = { 'missing-fields' } },
},
},
},
}
-- Ensure the servers and tools above are installed
-- To check the current status of installed tools and/or manually install
-- other tools, you can run
-- :Mason
--
-- You can press `g?` for help in this menu
require("mason").setup()
-- You can add other tools here that you want Mason to install
-- for you, so that they are available from within Neovim.
local ensure_installed = vim.tbl_keys(servers or {})
vim.list_extend(ensure_installed, {
"stylua", -- Used to format lua code
"black",
"clang-format",
"ormolu",
"beautysh",
"latexindent",
})
require("mason-tool-installer").setup({ ensure_installed = ensure_installed })
require("mason-lspconfig").setup({
handlers = {
function(server_name)
local server = servers[server_name] or {}
require("lspconfig")[server_name].setup({
cmd = server.cmd,
settings = server.settings,
filetypes = server.filetypes,
-- This handles overriding only values explicitly passed
-- by the server configuration above. Useful when disabling
-- certain features of an LSP (for example, turning off formatting for tsserver)
capabilities = vim.tbl_deep_extend("force", {}, capabilities, server.capabilities or {}),
})
end,
},
})
end,
},
{ -- Autoformat
"stevearc/conform.nvim",
setup = {
formatters = {
black = {
command = "black",
prepend_args = { "--line-length", "100" },
},
},
},
opts = {
notify_on_error = false,
format_on_save = {
timeout_ms = 500,
lsp_fallback = true,
},
formatters_by_ft = {
lua = { "stylua" },
-- Conform can also run multiple formatters sequentially
python = { "black" },
rust = { "rustfmt" },
cpp = { "clang-format" },
c = { "clang-format" },
sh = { "beautysh" },
tex = { "latexindent" },
},
},
},
{ -- Autocompletion
"hrsh7th/nvim-cmp",
event = "InsertEnter",
dependencies = {
-- Snippet Engine & its associated nvim-cmp source
{
"L3MON4D3/LuaSnip",
build = (function()
-- Build Step is needed for regex support in snippets
-- This step is not supported in many windows environments
-- Remove the below condition to re-enable on windows
if vim.fn.has("win32") == 1 or vim.fn.executable("make") == 0 then
return
end
return "make install_jsregexp"
end)(),
config = function()
require("luasnip.loaders.from_snipmate").lazy_load({ paths = "./snippets" })
local ls = require("luasnip")
-- some shorthands...
local snip = ls.snippet
local node = ls.snippet_node
local text = ls.text_node
local insert = ls.insert_node
local func = ls.function_node
local choice = ls.choice_node
local dynamicn = ls.dynamic_node
ls.add_snippets(nil, {
python = {
snip({
trig = "imp",
namr = "Imports",
dscr = "Comments for imports",
}, {
text({ "# Core modules", "" }),
insert(1),
text({ "", "# Non-core modules", "" }),
insert(2),
text({ "", "# SEI modules", "" }),
insert(3),
}),
},
tex = {
snip({
trig = "input",
namr = "Input Cell",
dscr = "Cell for SEIInputTable",
}, {
text({ "\\hypertarget{" }),
insert(1),
text({ "}{" }),
insert(2),
text({ "} & \\SEICell{", "\t" }),
insert(3),
text({ "", "}\\\\", "" }),
}),
},
})
end,
},
"saadparwaiz1/cmp_luasnip",
"hrsh7th/cmp-nvim-lsp",
"hrsh7th/cmp-path",
},
config = function()
-- See `:help cmp`
local cmp = require("cmp")
local luasnip = require("luasnip")
luasnip.config.setup({})
cmp.setup({
snippet = {
expand = function(args)
luasnip.lsp_expand(args.body)
end,
},
completion = { completeopt = "menu,menuone,noinsert" },
-- For an understanding of why these mappings were
-- chosen, you will need to read `:help ins-completion`
--
-- No, but seriously. Please read `:help ins-completion`, it is really good!
mapping = cmp.mapping.preset.insert({
-- Select the [n]ext item
["<C-n>"] = cmp.mapping.select_next_item(),
-- Select the [p]revious item
["<C-p>"] = cmp.mapping.select_prev_item(),
-- Accept ([y]es) the completion.
-- This will auto-import if your LSP supports it.
-- This will expand snippets if the LSP sent a snippet.
["<C-y>"] = cmp.mapping.confirm({ select = true }),
["<leader>j"] = cmp.mapping(function()
if luasnip.expand_or_locally_jumpable() then
luasnip.expand_or_jump()
end
end, { "i", "s" }),
["<leader>k"] = cmp.mapping(function()
if luasnip.locally_jumpable(-1) then
luasnip.jump(-1)
end
end, { "i", "s" }),
}),
sources = {
{ name = "nvim_lsp" },
{ name = "luasnip" },
{ name = "path" },
},
})
end,
snippet = {
expand = function(args)
local luasnip = require("luasnip")
if not luasnip then
return
end
luasnip.lsp_expand(args.body)
end,
},
},
{ -- You can easily change to a different colorscheme.
-- Change the name of the colorscheme plugin below, and then
-- change the command in the config to whatever the name of that colorscheme is
--
-- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`
"morhetz/gruvbox",
lazy = false, -- make sure we load this during startup if it is your main colorscheme
priority = 1000, -- make sure to load this before all the other start plugins
config = function()
-- Load the colorscheme here
vim.cmd.colorscheme("gruvbox")
end,
},
-- Highlight todo, notes, etc in comments
{ "folke/todo-comments.nvim", dependencies = { "nvim-lua/plenary.nvim" }, opts = { signs = false } },
{ -- Collection of various small independent plugins/modules
-- Simple and easy statusline.
-- You could remove this setup call if you don't like it,
-- and try some other statusline plugin
"echasnovski/mini.nvim",
config = function()
require("mini.statusline").setup({
content = {
active = function()
local mode, mode_hl = MiniStatusline.section_mode({ trunc_width = 120 })
local git = MiniStatusline.section_git({ trunc_width = 75 })
local diagnostics = MiniStatusline.section_diagnostics({ trunc_width = 75 })
local filename = MiniStatusline.section_filename({ trunc_width = 140 })
local fileinfo = MiniStatusline.section_fileinfo({ trunc_width = 120 })
local location = MiniStatusline.section_location({ trunc_width = 75 })
local search = MiniStatusline.section_searchcount({ trunc_width = 75 })
local words = getWords()
return MiniStatusline.combine_groups({
{ hl = mode_hl, strings = { mode } },
{ hl = "MiniStatuslineDevinfo", strings = { git, diagnostics } },
"%<", -- Mark general truncate point
{ hl = "MiniStatuslineFilename", strings = { filename } },
"%=", -- End left alignment
{ hl = "MiniStatuslineFileinfo", strings = { fileinfo } },
{ hl = "MiniStatuslineFileinfo", strings = { words } },
{ hl = mode_hl, strings = { search, location } },
})
end,
},
})
end,
},
{ -- Highlight, edit, and navigate code
"nvim-treesitter/nvim-treesitter",
build = ":TSUpdate",
config = function()
-- [[ Configure Treesitter ]] See `:help nvim-treesitter`
---@diagnostic disable-next-line: missing-fields
require("nvim-treesitter.configs").setup({
ensure_installed = { "bash", "c", "html", "lua", "markdown", "vim", "vimdoc" },
-- Autoinstall languages that are not installed
auto_install = true,
highlight = { enable = false },
indent = { enable = true },
})
-- There are additional nvim-treesitter modules that you can use to interact
-- with nvim-treesitter. You should go explore a few and see what interests you:
--
-- - Incremental selection: Included, see :help nvim-treesitter-incremental-selection-mod
-- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
-- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
end,
},
})
--Disable semantic highlights
for _, group in ipairs(vim.fn.getcompletion("@lsp", "highlight")) do
vim.api.nvim_set_hl(0, group, {})
end
--Testing scorch highlighting
vim.api.nvim_create_autocmd({ "BufRead", "BufNewFile" }, {
pattern = "*.scorch",
callback = function()
vim.bo.filetype = "scorch"
end,
})
-- Commands to disable formatting
require("conform").setup({
format_on_save = function(bufnr)
-- Disable with a global or buffer-local variable
if vim.g.disable_autoformat or vim.b[bufnr].disable_autoformat then
return
end
return { timeout_ms = 500, lsp_fallback = true }
end,
})
vim.api.nvim_create_user_command("FormatDisable", function(args)
if args.bang then
-- FormatDisable! will disable formatting just for this buffer
vim.b.disable_autoformat = true
else
vim.g.disable_autoformat = true
end
end, {
desc = "Disable autoformat-on-save",
bang = true,
})
vim.api.nvim_create_user_command("FormatEnable", function()
vim.b.disable_autoformat = false
vim.g.disable_autoformat = false
end, {
desc = "Re-enable autoformat-on-save",
})