Man page was repeating -f option, the second time instead of -i,
and this option was lost in usage() message. This patch also indent
the output of usage().
VT102ID is the sequence that the terminal returns when it is inquired
to identify itself. This value should be configurable in the same
way that another st parameters.
ISCONTROL chechks if a value is between 0 and 0x1f or
between 0x80 and 0x9f. Char signess depends of architecture
and compiler, so in some environment the second case is
always false (and wrong), Techo() calls ISCONTROL with a
char variable, whose type cannot be changed because tpuc()
expects a pointer to char, so the solution is to insert a
cast in the call to ISCONTROL.
tclearregion() was clearing regions using spaces and the current
attributes of the terminal. It was correct with all the modes excepct
underline, because they didn't affect the space character, but in
the case of underline it was a problem. A easy way of seeing this
problem is writing this in the last line of the terminal:
tput smul ; echo first; tput rmul; echo second; echo third
Fist was underlined, and second and third were not underlined, but
the spaces at the right of second was underlined becuause in the
previous scrool underline mode was set.
Master proccess was not showing any error message when the child
died with an error, and it was very confusing for the user (for
example with incorrect -e command).
One blinking mode is good enough, and two is too much. The best aproach
is emulate the fast blinking with the slow blinking, that it is more
used.
It is removed the flag ATTR_FASTBLINK because it has not a different
meaning of ATTR_BLINK, so it is not needed.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
According to ECMA-48¹ 8.3.117, an attribute value of 21 is "doubly
underlined", while 22 is "normal colour or normal intensity (neither
bold nor faint)".
Additionally, 25 is "steady (not blinking)", which likely means neither
slow blink nor fast blink.
¹: http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-048.pdf
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
XFilterEvent need to be called against every event, otherwise it would
missing some message in the xim protocol and misbehave on some im server.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Faint text is implemented by allocating a new color at one-half
intensity of each of the r, g, b components, or if the text bold at the
same time, it is not made lighter.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
There were a few occurrences of strcmp and strlen being called on Glyph.c[],
which is not always null-terminated (this actually depends on the last values in
the buffer s in ttyread()). This patch replace all the calls to strcmp with a
test on c[0] directly or a call to tlinelen, and the one to strlen with utf8len.
I also took the opportunity to refactor getsel and tdumpline.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Implement crossed-out text with an XftDrawRect call, similar to how
underline is implemented. The line is drawn at 2/3 of the font ascent,
which seems to work nicely in practice.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Implement invisible mode by setting the foreground color to be the same
as the background color. Not rendering anything would also be an
alternative, but this seems less likely to cause surprises in
conjunction with any hacks.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Faint, invisible, struck and fast blink are added as glyph attributes.
Since there's an edit here, let's take the opportunity to reorder them
so that they correspond to the two's power of the corresponding escape
code. (just for neatness, let's hope that property never gets used for
anything.)
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
This macro was not correct in some cases, and it was used only in
one place, where we did'nt get any benefit in performance of in size,
so the macro is removed and ceilf is used instead of it. The only
function needed from math.h is ceilf, so this patch defines the
prototype of it instead of including math.h.
Commit 5edeec1 introduced a wrong factor for nanosecond computation, the correct
value is 1E6. Time and timeout values are 10 times less than they should be and
this cause high CPU usage.
Reported by pyroh on IRC. Thanks!
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
This patch replaces the gettimeofday()/timeval-system with
uses of clock_gettime() with a monolithic clock and timespec-structs.
gettimeofday() is not accurate and prone to jumps and POSIX.1-2008
marks it as obsolete. Read more here [0].
The patch should speak for itself and decreases the binary
size for me by almost 200K(!).
[0]: http://blog.habets.pp.se/2010/09/gettimeofday-should-never-be-used-to-measure-time
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Refactor the SNAP_WORD part in selsnap, and fix a bug that caused the word
delimiters to be ignored if it was at the very beginning or end of a wrapped
line.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
selsort computes the wrong normalized coordinates when rectangular
selection is enabled, causing rectangular selection to only work
when going toward either the top left corner, or the bottom right
one.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Currently, selection is expanded to the end of the line over line breaks only in
regular selection mode, when the line in not empty and when going down and/or
right. This covers all the cases including word selection mode, with the
exception of rectangular selection because it would make this mode too rigid.
This adjustment is made in selsort so I renamed it to selnormalize to better
reflect what it does now.
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
By the recommendation of FRIGN I refactored xsetcolorname to remove the
unnecessary r, g, b variables when allocating a new color. Colors are
now freed and set to the new color. A die() should not happen here. Oth‐
erwise it is easy for applications to kill st. St should be resilent to
malicious input.
Second this patch standardises the naming of »color«. There is no
»colour« here. Maybe in some parts of the world.
I mainly improved the slightly off algorithm used to load colours in the 256-colour-space and
removed unnecessary local values (r,g,b,colour).
"colour" is not necessary as a punchbag for XftColorAlloc[Value,Name], as they don't mess with
the result-adress until they are absolutely sure everything worked out[0].
Being at it, I changed the error-returns for AllocValue to dies (just like in xloadcols()), as
a failure is most likely an OOM-situation you better catch early.
In case of an invalid name everything stays the same.
[0]: http://www.opensource.apple.com/source/X11libs/X11libs-40/libXft/libXft-2.1.13/src/xftcolor.c
Signed-off-by: Christoph Lohmann <20h@r-36.net>
Similar to xterm or urxvt holding shift before selecting text with the mouse
allows to override copying text. For example in tmux with "mode-mouse on" or
vim (compiled with --with-x), mc, htop, etc.
forceselmod in config.h sets the modifier to use this mode, by default
ShiftMask.
Signed-off-by: Hiltjo Posthuma <hiltjo@codemadness.org>
ATTR_GFX was used long time ago to detect when terminal was in
graphic mode. Today graphic mode is implemented using a charset
pointer, so ATTR_GFX is not needed anymore because graphic
condition can be detected directly checking if current charset
is GRAPHICS C0.
This patch fixes the bug introduced in
8f11e1cd03
To reproduce the bug:
1. Save cursor: printf '\e[s'
2. Load cursor: printf '\e[u'
3. Resize st window.
4. Load cursor again: printf '\e[u'
Quentin Carbonneaux
Roberto E. Vargas Caballero
noname
Michael Forney
Weng Xuetian
Eric Pruitt
Anders Eurenius
Ivan Delalande
FRIGN
Troy Sankey
Silvan Jegen
Christoph Lohmann
Hiltjo Posthuma
Balazs Kezes
Alexander